Heze Ruikang Machinery Co., Ltd.
Heze Ruikang Machinery Co., Ltd.
Add to Cart
1. Put on make-up the cotton and kapok production process:
This equipment is divides cuts the good degreasing to lap, the adhesive-bonded cloth or the gauze, laying aside raw material after the compaction, the heating embosses, rolls cuts process one time to complete.
2. The main feature: The high speed punch press revolving blanking principle of work, the technology is mature, the work is stable, the service work load are few;
3. Output mode: The pipeline arrangement output, the code falls neatly, the bagging is convenient, a person then operates the complete machine, big reduced artificial amount of use;
4. The good man-machine operation contact surface, may unfold the real time operation information, is advantageous for the production monitoring;
5. The mold replacement is convenient, the construction cost is lower than greatly rolls cuts the carving flower cutter bar, moreover after the mold wears, easy to repair, does not need to discard the replacement, saves the maintenance cost.
6. Put on make-up the cotton and kapok major
Technique parameter:
Model | K-MD-A cotton pad making machine |
Installing equipment tatol output | 5kw(380V 50HZ) |
Output velocity | 20-30 meters/minutes |
Production specification | According to the request adjustment |
Air pressure | 0.6-0.8 Mpa |
Machine size | 3.5m*1.7m*2.5m (long * wide * high) |
Machine weigh | Approximately 2T |
Note: If time product manufacturing must spurt the rubber with the multilayer material compound, must additional install theglue sprayer